Cisco WS-C3560V2-24TS-S Catalyst 3560 v2 Switch

Cisco WS-C3560V2-24TS-S Catalyst 3560 v2 Switch Description

Cisco WS-C3560V2-24TS-S Catalyst 3560 v2 Switch
The Cisco WS-C3560V2-24TS-S Catalyst 3560 v2 Switch is the next-generation energy-efficient Layer 3 fast Ethernet switches. This new series of switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco WS-C3560V2-24TS-S Catalyst 3560 v2 Switch consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video. Purchase the Cisco WS-C3560V2-24TS-S Catalyst 3560 v2 Switch today.

What It Is and Why You Need It

Lower power consumption than its predecessors
Backward compatible - uses the same Cisco IOS Software image as the 3560 series and has the same feature set
Full EnergyWise support to monitor energy consumption of network infrastructure and implement energy saving programs to reduce energy costs
Compatible with Cisco Redundant Power System (RPS) 2300
All units have a uniform depth of 11.9 inches for better cable management
Preconfigurable with the Cisco IOS Software release at the time of ordering
IPv6 routing included in the IP Services feature set
DC powered stand-alone model

Features

Cisco SmartPorts simplify the configuration of advanced Cisco Catalyst capabilities, encapsulating years of Cisco networking expertise. Cisco SmartPort macros offer a set of verified, pretested, Cisco-recommended switch port configurations or templates per connection type that are easy to apply, enabling users to consistently and reliably configure essential security, IP Telephony, availability, QoS, and manageability features with minimal effort and expertise.
Cisco AutoSmartPorts automatically execute SmartPort macros based on the end device type, such as IP Phones, Desktop Computers, and WLAN Access Points.
Cisco Express Setup simplifies initial configuration with a Web browser, eliminating the need for more complex terminal emulation programs and CLI knowledge.
IEEE 802.3af and Cisco prestandard PoE support comes with automatic discovery to detect a Cisco prestandard or IEEE 802.3af endpoint and provide the necessary power without any user configuration.
DHCP autoconfiguration of multiple switches through a boot server eases switch deployment.
DHCP AutoInstall simplifies the deployment of a large number of switches by automatically downloading a specified Cisco IOS Software image and a configuration file from a TFTP server. This feature can be used to implement a "zero touch deployment".
DHCP Port Based Allocation allows you to allocate the same IP address for a specified port. The feature allows persistent allocation of IP addresses to specified network devices.
Embedded Event Manager (EEM) is a powerful and flexible tool for management and automation. This feature can be used to monitor network events and program automatic actions based on these network events. Policies can be defined via CLI or Tcl script and can be used in a variety of scenarios, such as automatically backing up a configuration file at a specified time or triggering an alert when traffic congestion crosses a specified threshold. EEM requires the IP Services license.
Configuration Replace and Rollback simplifies configuration management by allowing you to rollback configuration changes. This feature allows you to replace a configuration file with a saved configuration file without a switch reload, and up to 14 configuration files can be saved.
Automatic QoS (Auto QoS) simplifies QoS configuration in voice-over-IP (VoIP) networks by issuing interface and global switch commands to detect Cisco IP phones, classify traffic, and enable egress queue configuration.
Autosensing on each 10/100 port detects the speed of the attached device and automatically configures the port for 10- or 100-Mbps operation, easing switch deployment in mixed 10- and 100-Mbps environments.
Autonegotiating on all ports automatically selects half- or full-duplex transmission mode to optimize bandwidth.
Dynamic Trunking Protocol (DTP) helps enable dynamic trunk configuration across all switch ports.
Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel groups or Gigabit EtherChannel groups to link to another switch, router, or server.
Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.
DHCP Server enables a convenient deployment option for the assignment of IP addresses in networks that do not have a dedicated DHCP server.
DHCP Relay allows a DHCP relay agent to broadcast DHCP requests to the network DHCP server.
IEEE 802.3z-compliant 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-T, and coarse wavelength-division multiplexing (CWDM) physical interface support through a field-replaceable SFP module provides unprecedented flexibility in switch deployment.
Support for the Cisco Catalyst 3560 SFP Interconnect Cable facilitates a low-cost, point-to-point gigabit connection between Cisco Catalyst 3560 v2 Series switches.
The default configuration stored in Flash memory helps ensure that the switch can be quickly connected to the network and can pass traffic with minimal user intervention.
Automatic medium-dependent interface crossover (Auto-MDIX) automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed on a 10/100 port.
Time Domain Reflectometry (TDR) to diagnose and resolve cabling problems on copper Ethernet ports.

Now! Special price Click Here

Ust-atsul

Friday, November 2, 2012